Hermetically Sealed Sliding Doors
To maintain satirically and the correct air pressure the room, all doors into and out should be of the sliding, hermetically sealing type. The doors should meet following specifications. Meets international quality & safety requirements.
- Doors should be wired to the current IEE regulations & BS797/Standard
- Motor should be DC 2-6V 7IIW brush less DG motor.
- Noise level of movement should not be more then 60 decibel.
- Controller should able microprocessor based and the be GE market.
- Power efficiency should be .95 lin AGV full load.
- The track should be made up of single piece extruded aluminum.
Environment temperature should be-Zil to +55ITC. - Starting time should be able to regulate from .5 second to 23 second & starting speed should be
6Ull mm per second. - Electrical safety codes for high & low voltage system.
Design should meet HTM 2020/2021 standards. The doorframe should be made of high quality anodize aluminum and the door panlel shoulg be made of compact laminate that can withstand high abrasion. To ensure efficient sealing of the doors frames should br provided. They will consist of reinforced plasterboard panels faced with same laminate as the door should seal on all four edges in the closed position & should be surface installed type. The track of the door should be constructed with high quality door lock with aluminum extrusion, fixed firmly to the door in such a way they do not obstruct trolley movement through the door. The door frames should be edged with an aluminum extrusion & with concealed fixings that are adjustable during installation to ensure a I[10% hermetic seal I achieved. Vision panels, 31mm X 31T1mm should be provided in the doors. The door controller should be sensing overload condition and in overload case the door will automatically stop & reverse the direction of travel. The controller should be capable of either being operated be elbow switches/foot switched, radar switch/touch less sensor). All doors should be able to be operated easilly manually in the event of failure of the power supply of the automation unit.
Flip Flap Doors
Flip Flap Doors by Metaflex are the perfect answer when it comes to the reliable solution for hygienic areas room closure system. Build from high class materials with optimum level of engineering, these doors meets the important criteria for workflow optimization.
- High resistance to impact.
- Resistant to fats, solvents and acids.
- Perfect hygiene
Would you like to know more about our Flip Flap Doors? Please contact us!
MAK Health Lead Line Sliding
These Lead Line doors have been specially developed for operation theatres with X-ray equipment, Cath Labs as well as rooms with radiation shielding requirements.
- Sliding door system
- Airtight/ hermetically sealing
- Completely smooth finishing
